环太平洋地震带与柯里奥利力   总被引：5，自引：0，他引：5       下载免费PDF全文

杨学祥  朮洪亮 《地震工程学报》1995,17(4):13-16

柯里奥利力是地球自转的一种惯性力，它使垂直下降的物体向东偏转，垂直上升的物体向西偏转，是形成环太平洋地震带中东西两岸构造应力差别的根本原因。  相似文献   

论板块运动的驱动力          下载免费PDF全文

谢鸣一  谢鸣谦 《地质科学》1987,(3):209-220

本文从动力学的角度讨论了板块运动的驱动机理,并提出了计算板块扩张速度的公式,然后求出了不同类型板块的扩张速度。用此公式所计算出的板块扩张速度与实际观测速度很符合。  相似文献   

等幅侧向位移循环下柱混凝土纤维应变规律的试验研究     

傅剑平  李英民  王敏  陈小英  白绍良 《地震工程与工程振动》2005,25(6):88-95

在已完成的包括16个构件的等位移循环加载钢筋混凝土柱的系列试验中，通过在其中3根柱的塑性铰区沿混凝土受力方向安设位移计，较准确测定了混凝土测试标距内的平均应变在一个加载循环内的变化规律及其随周数增长的变化规律；发现了单周最大压应变随周数的增长而持续增大，单周最大名义拉应变随周数增长而持续减小的重要现象；并与柱顶水平力-水平位移滞回规律实测结果相对应，结合截面受力特征对所得单周和多周应变变化规律的成因作了分析。  相似文献   

Fault induced permanent ground deformations: Experimental verification of wet and dry soil, numerical findings’ relation to field observations of tunnel damage and implications for design     

Jrgen Johansson  Kazuo Konagai 《Soil Dynamics and Earthquake Engineering》2007,27(10):938-956

Few building codes contains provisions fault surface ruptures and accompanying soil deformations which constitutes a great risk to human lives, buildings and infrastructure. A numerical and experimental comparison show a fair agreement of result. Analysis of “real” scale show the how water increases the incompressibility of wet soil causing shear deformations to become larger and conjugate ruptures to appear for reverse faults. Field observations and numerical analysis indicates that horizontal compression of soil surrounding underground structures should be taken into account in design.  相似文献   

Equivalent force control method for generalized real‐time substructure testing with implicit integration     

Bin Wu  Qianying Wang  P. Benson Shing  Jinping Ou 《地震工程与结构动力学》2007,36(9):1127-1149

This paper presents a new method, called the equivalent force control method, for solving the nonlinear equations of motion in a real‐time substructure test using an implicit time integration algorithm. The method replaces the numerical iteration in implicit integration with a force‐feedback control loop, while displacement control is retained to control the motion of an actuator. The method is formulated in such a way that it represents a unified approach that also encompasses the effective force test method. The accuracy and effectiveness of the method have been demonstrated with numerical simulations of real‐time substructure tests with physical substructures represented by spring and damper elements, respectively. The method has also been validated with actual tests in which a Magnetorheological damper was used as the physical substructure. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Towards error‐free hybrid simulation using mixed variables     

Tarek Elkhoraibi  Khalid M. Mosalam 《地震工程与结构动力学》2007,36(11):1497-1522

Two procedures are developed and implemented in a hybrid simulation system (HSS) with the aim of enhancing the accuracy and reliability of the online, i.e. pseudo‐dynamic, test results. The first procedure aims at correcting the experimental systematic error in executing the displacement command signal. The error is calculated as the difference between command and feedback signals and correlated to the actuator velocity using the least‐squares method. A feed‐forward error compensation scheme is devised leading to a more accurate execution of the test. The second procedure employs mixed variables with mode switching between displacement and force controls. The newly derived force control algorithm is evaluated using a parametric study to assess its stability and accuracy. The implementation of the mixed variables procedure is designed to adopt force control for high stiffness states of the structural response and displacement control otherwise, where the resolution of the involved instruments may favour this type of mixed control. A simple pseudo‐dynamic experiment of steel cantilever members is used to validate the HSS. Moreover, two experiments as application examples for the two developed procedures are presented. The two experiments focus on the seismic response of (a) timber shear walls and (b) reinforced concrete frames with and without unreinforced masonry infill wall. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

常见砼裂缝成因判定与处理的理论研究     

李青松  殷友东 《化工矿产地质》2002,24(3):184-188

砼的裂缝对于砼结构是一个非常重要的问题,正确判定裂缝的成因是正确处理裂缝的前提。通常的砼裂缝成因判定存在着方法复杂、时间长、代价高等问题。通过对砼裂缝产生的根本原因的分析与研究,并从裂缝的根本特性出发,将常见的砼裂缝简化为应力裂缝和变形裂缝两类,两类裂缝具不同特性。虽然裂缝产生的具体原因不同,但只要其本质特性相同,处理的方法是基本相同的,对于其产生的具体原因可不必深究。因此对裂缝成因判定的主要工作就是判定裂缝属于应力裂缝还是变形裂缝,这大大地简化了对裂缝成因的判定过程,从而以各自适合的方法进行处理。  相似文献   

某铁路大桥钻孔灌注桩工程性状浅析     

韩爱果  韩坤立  徐满意  徐品焕 《水文地质工程地质》2002,29(3):47-48,55

通过对某铁路特大桥钻孔灌注桩单桩竖向静载荷试验、桩身轴力测试，探讨钻孔灌注桩侧摩阻力发挥的影响因素及荷载传递中的工程性状，为钻孔灌注桩的设计、施工提供参考。  相似文献   

圆钢管混凝土压弯构件荷载一位移滞回性能分析   总被引：6，自引：1，他引：6  

韩林海  陶忠  阎维波 《地震工程与工程振动》2001,21(1):64-73

在空钢管中填充混凝土可以避免或延缓钢管过早地发生局部屈曲，并有效地提高构件的延性，从而增强构件的抗震性能，本文在对圆钢管混凝土构件弯矩－曲率关系分析的基础上，分析了圆钢管混凝土压弯构件P－△滞回关系曲线，理论计算结果得到国内外大量结果的验证，基于理论分析模型，分析了各参，如构件轴压比，长细比，截面含钢率和材料强度等因素对圆钢管混凝土压变变构件P－△滞回关系曲线的影响，最后，确定了圆钢管混凝土压弯构件P－△恢复力学模型和延性系数的简化计算方法。  相似文献   

湖南省经济增长的动力机制与潜在问题分析     

邱文彬  陈国生  刘松军 《热带地理》2001,21(2):145-149

通过对湖南在改革开放20年以来所取得的经济增长成果的分析，探讨其经济波动性及其结构矛盾，对开放程度、使用外资额、企业固定资产投资额、工业效率、产业结构、人口规模等多方经济增长的动力机制，采用因子分析法等多种计量手段，分析湖南省经济增长的主要推动因素，揭示湖南省经济增长方式的特点和存在的问题，并提出了相应的对策。  相似文献